Коммит 957a9f28 создал по автору Ilya Portnov's avatar Ilya Portnov
Просмотр файлов

Update documentation.

владелец 9bb97576
Скрыть пробелы
Построчно Рядом
docs/nodes/modifier_make/adaptive_polygons_mk2.rst
Просмотр файла @ 957a9f28
...@@ -11,7 +11,12 @@ deformed (adapted) to match the shape and normals of recipient's face. ...@@ -11,7 +11,12 @@ deformed (adapted) to match the shape and normals of recipient's face.
This node works primarily with Quads and Tris; if you ask it to work with NGons This node works primarily with Quads and Tris; if you ask it to work with NGons
(N > 4), it can produce weird resuls. (N > 4), it can produce weird resuls.
One can pass recipient object through **Inset Special** node to achieve results As an option, the node can process NGons (and Quads / Tris, optionally) in so
called "Frame / Fan" mode. In this mode, each face of recipient mesh is inset
by some amount, so it is replaced with a number of either Quads or Tris. Each
of such faces is then processed as usual.
Or one can pass recipient object through **Inset Special** node to achieve results
similar to Tissue's "Fan" or "Frame" modes. similar to Tissue's "Fan" or "Frame" modes.
In many cases it is good idea to pass the output of this node through **Remove In many cases it is good idea to pass the output of this node through **Remove
...@@ -37,6 +42,10 @@ This node has the following inputs: ...@@ -37,6 +42,10 @@ This node has the following inputs:
- **Width coeff**. Coefficient for donor object width (size along X,Y axis, - **Width coeff**. Coefficient for donor object width (size along X,Y axis,
usually). Default value is 1.0. The input expects one number per each usually). Default value is 1.0. The input expects one number per each
recipient object face. recipient object face.
- **Frame width**. Width of frame for "Frame / Fan" mode. Maximum value of 1.0
means that there will be no gap in the center of face, so this will be "Fan"
mode. Default value is 0.5. This input is available only if **Frame mode**
parameter is set to value other than **Do not use**.
- **Z coeff**. Coefficient for donor object size along recipient object face - **Z coeff**. Coefficient for donor object size along recipient object face
normal. Exact meaning depends on **Z Scale** parameter (see below). The normal. Exact meaning depends on **Z Scale** parameter (see below). The
default value is 1.0. The input expects one number per each recipient object face. default value is 1.0. The input expects one number per each recipient object face.
...@@ -146,6 +155,22 @@ This node has some number of parameters, and most of them are accessible only in ...@@ -146,6 +155,22 @@ This node has some number of parameters, and most of them are accessible only in
The default value is **Bounds**. The default value is **Bounds**.
- **Frame mode**. This defines when to apply "Frame / Fan" mode. The available values are:
- **Do not use**. Frame / fan mode will not be used.
- **NGons only**. Frame / fan mode will be used for NGons (n > 4) only. Other
faces will be processed in simple replacement mode.
- **NGons and Quads**. Frame / fan mode will be used for NGons and Quads
(i.e. n >= 4) only. Tris will be processed in simple replacement mode.
- **Always**. Frame / fan mode will be used for all faces.
The default value is **Do not use**.
Note that "Frame / Fan" mode makes either several Quads (when FrameWidth <
1.0) or several Tris (when FrameWidth == 1.0) out of each recipient face. How
exactly these Quads and Tris will be processed is defined by **Faces mode**
parameter.
- **Faces mode**. This defines how deformations of donor object will be - **Faces mode**. This defines how deformations of donor object will be
calculated for Quad and Tris recipient faces. Available values are: calculated for Quad and Tris recipient faces. Available values are:
......
Поддерживает Markdown
0% или .
You are about to add 0 people to the discussion. Proceed with caution.
Сначала завершите редактирование этого сообщения!
Пожалуйста, зарегистрируйтесь или чтобы прокомментировать